Asus Crosshair II Guia De Instalacion página 20

1.8 Front panel cables
To connect the front panel cables:
• RESET (Reset Switch)
• PLED (Power LED)
• PWRSW (Power Switch)
• IDE_LED (IDE Hard Disk Active LED)
• SPEAKER (Speaker Connector)
20- pin front panel connector
10-1 pin front panel connector
M2N-X
• The front panel cables of your chassis may differ with models or designs.
Connect these connectors to the motherboard according to the label.
• If the LEDs do not light up and the pin loction is correct, you might misplace
the ground pins with the signal pins. Usually the white wire stands for the
ground pins and the color‑coded wire for the signal pins.
• The SPEAKER, RESET and PWRSW front panel cables have no specific
orientation, while IDE_LED and PLED cables do. Connect the the cable
PIN1 to the connector PIN1 on the motherboard.
• The front panel connector varies with your motherboard model, refer to the
user guide for more information.
ASUS Motherboard installation guide
PLED
PIN1
PANEL
PIN1
IDE_LED
Requires an ATX power supply.
*
PWR LED PWR BTN
F_PANEL
HD LED RESET
SPEAKER
RESET
PWRSW
1