Asus Crosshair II Guia De Instalacion página 17

1.7. PATA hard disk drive
1. Insert the PATA hard disk drive into
the bay.
3. Orient and connect the signal cable
to the hard disk drive. The red stripe
on the cable is the pin1 end. Match
the dummy-proof notch and do not
force the cable into the connector.
5. Attch the other end of the signal
cable to the corresponding slot on
the motherboard.
1
2. Align the screws holes and secure
the disk drive with screws.
4. Connect the 4‑pin power cable to
the connector at the back of the
hard disk drive.
Chapter 1: Quick Start