Connecting An Hdmi™ Or Dvi Device - Toshiba FST PURE 26HF66 El Manual Del Propietario

Connecting an HDMI™ or DVI device
The HDMI (High-Definition Multimedia Interface) input on
your TV receives digital audio and uncompressed digital
video from an HDMI source device, or uncompressed
digital video from a DVI (Digital Visual Interface) source
device.
This input is designed to accept HDCP (High-bandwidth
Digital Content Protection) program material in digital form
from EIA/CEA-861/861B-compliant
devices (such as a set-top box or DVD player with HDMI or
DVI output).
The HDMI input is designed for best performance with high
definition video signals. It will accept and display 480i,
480p, 720p and 1080i signals.
NEVER CONNECT THIS TV TO A PERSONAL
COMPUTER (PC). This TV is not intended for
use with a PC.
To connect an HDMI device, you will need:
• one HDMI cable (type A connector)
For proper operation, it is recommended that you use
as short an HDMI cable as possible. You should not
encounter difficulty if you use an HDMI cable that is
shorter than 16.4 ft (5m).
HDMI cable transfers both video and audio. Separate
analog audio cables are not required (see illustration
below).
You must set the HDMI audio input setting to
"HDMI" in the AUDIO menu (see page 38).
Some CDVs (Video CDs) may not output digital audio
signals. In that case, you may hear sound by connecting
analog audio cables. If you do use analog audio cables for
this reason, you will need to set the HDMI audio input
setting to "DVI" to hear the analog audio (see page 38).
Note: If you connect an HDMI device and analog audio
cables and play media with digital audio output, to hear
digital audio you must set the HDMI audio input setting
to "HDMI" (page 38).
HDMI device
VIDEO AUDIO
L R
IN
OUT
Back panel of TV
J3W60321A_En_p07-14 13
[1] consumer electronic
HDMI OUT
13
[1] EIA/CEA-861/861B compliance covers the
transmission of uncompressed digital video with high-
bandwidth digital content protection, which is being
standardized for reception of high-definition video
signals. Because this is an evolving technology, it
is possible that some devices may not operate
properly with the TV.
To ensure that the HDMI or DVI device is reset
properly, it is recommended that you follow these
procedures:
• When turning on your electronic components, turn
on the TV first, and then the HDMI or DVI device.
• When turning off your electronic components, turn
off the HDMI or DVI device first, and then the TV.
To connect a DVI device, you will need:
• one HDMI-to-DVI adapter cable
(HDMI type A connector)
For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 9.8 ft (3m). The
recommended length is 6.6 ft (2m).
• one pair of standard analog audio cables
An HDMI-to-DVI adapter cable transfers only video.
Separate analog audio cables are required (see
illustration below).
You must set the HDMI audio input setting to
"DVI" in the AUDIO menu (see page 38).
DVI device
DVI
VIDEO AUDIO
OUT
L R
IN
OUT
HDMI, the HDMI logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing, LLC.
27/2/06, 9:54 AM
Back panel of TV