STAUFF PPC-CAN-FR Manual De Instrucciones página 42

Power supply connection (B)
• Through an external power supply using the Power Supply connection
of the frequency adapter. Here input voltage must be between 8 to 24
volts.
The power supply is not included. The meter's power supply can
be connected to the Power Supply connection.
USB port (C)
42
Power can be supplied to the frequency
adapter in three different ways:
• Power is supplied via the Handmeter
CAN output port from the attached meas-
uring device.
• Power is supplied via the Handmeter An-
alog output port from the attached meas-
uring device.
The frequency adapter can be configured
using a PC configuration program. The PC
with the installed software is connected via
the USB cable to the frequency adapter's
USB port.