Fimar GL33 Uso Y Mantenimiento página 23

GENERAL AND SAFETY INFORMATION
Upon receiving the appliance, make sure all components are integral. In the event of
damages or missing parts, contact your local dealer to arrange for future procedures.
– Installation must be performed by expert and authorised personnel who must previously
ensure that the electrical mains meet specific current laws, regulations and standards in
effect in the country of use.
– Before installing the appliance, make sure the selected area is suitable, sufficiently ven-
tilated, lit and equipped with permanent vents to guarantee adequate air circulation and
the air flow required for combustion. Also check that exhaust hoods or other devices able
to remove cooking vapours are installed.
– Make sure the room around the appliance is sufficient (at least 10 per side) for easy
cleaning, maintenance and facilitate air flow to the burners. Also make sure the support
surface is stable, level and easy to clean to avoid the risk of dirt accumulations and food
product contamination.
Always check the installation regulations in effect in the country of appliance use.
Personnel authorised to perform electrical connections must make sure the mains
grounding system is efficient and that the mains voltage and frequency match the
data listed on the appliance identification plate.
For appliances with special features (shape, weight, dimensions, etc.) the information in-
cluded in this paragraph may not be thorough. Any additional information is listed in the par-
agraph on "Lifting Procedures" for each single appliance.
- 7 -
EN
English language