Important User Information - 3M PELTOR WS FL60-WS5 Serie Manual De Instrucciones

WS Adapter

IMPORTANT USER INFORMATION

• If sound distortion increases or the volume becomes too weak, it is time to charge or replace
the batteries. Never replace or insert batteries with the unit switched on. Ensure that the
batteries are correctly aligned before using the product.
• Remove the batteries if storing for extended periods of time.
• Under extremely cold conditions, warm the adapter before using.
• Operating temperature: -20°C (-4 °F) to +55°C (131 °F)
APPROVALS
Hereby, 3M Svenska AB declares that the Bluetooth® wireless communication is in compliance with
Directive 2014/53/EU
and other appropriate directives to fulfill the requirements for the CE marking. The full text of the EU
declaration of conformity is available at the following internet address: www.3M.com/Peltor/doc.
Upon request, type in your part number. The part number of your adapter can be found at the
bottom of the adapter as seen in the picture below.
A copy of the declaration of conformity and additional information required in the directives can
also be obtained by
contacting 3M in the country of purchase. For contact information, see last pages of this user
instruction.
I.C. RSS-210 and ICES-103 (Canadian radio test)
This product is covered by the WEEE directive 2002/96/EC and is recyclable. Dispose the prod-
uct in accordance with national regulation. Use local recycling system for electronic products.
COMPONENTS
(A:1) On/Off/Mode button
(A:2) Bluetooth® button
(A:3) Attachment slot
(A:4) Attachment Clip
GB
9