Worx WX721 Manual Original página 12

SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
This product has been marked
with a symbol relating to removing
electric and electronic waste. This
means that this product shall not
12
be discarded with household waste
but that it shall be returned to a
collection system which conforms
to the European Directive 2002/96/
CE. It will then be recycled or
dismantled in order to reduce the
impact on the environment. Electric
and electronic equipment can be
hazardous for the environment
and for human health since they
contain hazardous substances.
Angle grinder
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for cutting,
roughing and brushing metal and stone
materials without using water. For cutting
metal, a special protection guard for cutting
(accessory) must be used.
1. INSTALLING THE AUXILIARY
HANDLE (See Fig. A)
You have the option of two working positions
to provide the safest and most comfortable
control of your angle grinder. The handle is
screwed clockwise into either hole on the
sides of the gear case.
Anti-vibration auxiliary handle
The anti-vibration auxiliary handle reduces
the vibrations, making operation more
comfortable and secure.
2. ADJUSTING WHEEL GUARD
(See Fig. B)
Before any work on the machine itself,
pull the mains plug.
For work with grinding or cutting discs,
the wheel guard must be mounted.
WHEEL GUARD FOR GRINDING
The coded projection on the wheel guard
(5) ensures that only a guard that fits the
machine type can be mounted.
Open the clamping lever (11). Place the wheel
guard (5) with coded projection into the
coded groove on the spindle of the machine
head and rotate to the required position
(working position).
To fasten the wheel guard (5), close the
clamping lever (11).
The closed side of the wheel guard (5) must
always point to the operator.
NOTE: With the clamping lever (11) open the
clamp adjusting nut (9) can be adjusted to
ensure the guard is securely clamped after
the clamping lever (11) is finally closed.
EN