Settings; Technical Specifications - hager EE600 Manual Del Usuario

Action

Settings

Potentiometer
Use Auto settings Auto Settings
(factory) Put the Lux potentiometer on
or set by the "auto test".
remote control The settings are predefined :
to switch the light Lux = , (operating
automatically at night only)
for a given time. time = 3 min,
sensitivity = max.
Remote control settings
Remote control settings
(Manual Settings inhibited).
Automatically Installer settings
switch on the light
for a defined time.
Briefly turn on Impulse
the light.
Auto settings are usable with
time = 5 s.
(cannot be changed).
Test and validate Test mode
the detection zone. Move the potentiometer 2 to
"auto test". On this position,
the remote control can be used.
After 3 min without detection of
movement, the product returns to
normal operation.
Adjust the Allows setting the range
sensitivity. to avoid disturbance.
9
Using the remote control
(Option, ref. EE806/ 52900)
The detector receives instructions from the
remote control when the Lux potentiometer 2 is
on the "auto test" position.
If the potentiometer is put on another value, the
local setting resumes.
The LED of the detector lights up to confirm the
signal with the remote control.
It flashes quickly for 2 s when an instruction is
received and 5 s for a reset.
When an instruction is not authorised, the LED
lights up for 1 s.
The available settings are :
- fixed time,
- level of luminosity,
- sensitivity,
- on / off,
- holidays
- auto
- reset (return to factory settings)
- test.
Potentiometer Values in lux
position
≤
5
≈
50/ 60
<
1000

Technical specifications

What to do if...
Power : around 60 W (300 W luminous energy) The floodlight does not switch on :
Colour of the light : 5700 Kelvin • In day/night mode, the twilight setting is set to
Luminous flux : 3400 lumen night only mode.
Power supply : 230 V AC 50 / 60 Hz - Readjust.
Compulsory protection : 10 A gG/gl fuse or
• Incorrect adjustment of the detection zone.
16A circuit-breaker curve C or curve B
- Readjust.
Insulation class : II
Recommended cable : U1000R02V3G1.5 The floodlight does not switch off :
Connection using • Continuous movement in the detection zone.
screw free terminals : 1 ... 1,5 mm 2 - Inspect the detection zone, you may need to
Protection class : IP55 readjust the zone or mask part of it.
Operating temperature : -20 ... +45 °C
The floodlight continually switches on and off :
Storage temperature : -20 ... +60 °C
• Animals are moving in the detection zone.
Detection angle : 220/360°
- Adjust the sensitivity.
Forward detection distance : 12 m
Twilight threshold setting : 5 ... 1000 lux
The floodlight switches on involuntarily :
Operating duration setting : 5 s ... 15 min
• The wind is stirring the trees and bushes in the
Accessories : adjustable shutters supplied,
detection zone.
mounting screws.
- Adjust the zone.
• Cars passing on the road are being detected
- Adjust the zone.
• Sudden temperature changes due to the weather
(wind, rain or snow).
- Adjust the zone or mount the equipment in a
different place.
10
å
Usable in all Europe and in Switzerland
Hereby, hager Controls, declares that this LED floodlight is
in compliance with the essential requirements and other
relevant provisions of the low voltage directives 2006/95/EC
and CEM 2004/108/EC.
The CE declaration can be consulted on the site :
www.hagergroup.net
z