Electric Safety - GYS Toparc kit NUM TIG-1 Manual De Instrucciones

WARNINGS - SAFETY RULES
GENERAL INSTRUCTION
These instructions must be read and understood before any operation.
Any modification or maintenance not indicated in the manual must not be undertaken.
The manufacturer shall not be held liable for any personal injury or material damage caused by use not in accordance with the instructions in this
manual. In the event of a problem or uncertainty, consult a qualified person to handle the installation correctly.
This manual describes the wiring of this product. Any user who does not strictly comply with the safety instructions described in this manual may
be exposed to electrical risks and/or a serious or even fatal accident.

ELECTRIC SAFETY

During any intervention on the product, make sure to secure the area by keeping at a distance any person who has not read the instructions of safety
described in this manual. This product should preferably be installed by a professional in accordance with the installation rules in force in the country.
If not, it is recommended that you read these rules before working on it.
PRECAUTIONS AGAINST ELECTROSTATIC DAMAGE
Static electricity can damage electronic equipment. Use a grounded anti-static wrist strap, an ankle strap, or equivalent safety device
to prevent electrostatic damage (ESD) when installing this product.
Electrostatic damage can irreparably damage the generator and/or the product. To protect electronic components from electrostatic damage, place
this product on an antistatic surface, such as an antistatic discharge mat, antistatic bag, or disposable antistatic mat.
KIT CONTENTS
Electronic card
97743
PRESENTATION
The NUM TIG-1 digital kit (ref. 037960) allows the addition of an automation module (SAM) to compatible TIG machines.
Compatibility
TITANIUM 400 AC/DC HF
IMS TITANIUM 400 AC/DC HF
TITAN 400 DC HF
IMS TITAN 400 DC HF
4
Wire harness RJ45 Cable
300 mm 500 mm
ref.
013568
037830
013520
013810
KIT NUM TIG-1
Cable DB9
500 mm
SAM
(064935)
Adapter
Support plate
Sub-D9
EN
Support card