ENGLISH
Remote panel accessories
Depending on the type of electrical box, the following accessories can be ordered: frame, sub-frame, plate and multi-fun-
ction remote panel.
- COD. 21.381 - CB LCD D : This accessory can be used in the presence of a round recessed box with 60mm holes (box
not supplied )
- COD. 21.194 - CB LCD R : This accessory can be used in the presence of a standard 503 recessed box (box not sup-
plied)
Remote panel functions
Product management can also be entrusted to a user interface that allows you to:
• Adjustments that can be made from the remote panel are the same as that of the membrane interface.
User interface
The user interface is used by means of a graphic display and some keys as shown in the figure below.
The following operations can be performed through the user interface:
• Operating mode selection
• Temperatures control
• Alarms management
I
Function 1 recall key.
II
Function 2 recall key.
X
Key to exit from the displayed page.
Key to: increase speed / move to the upper line
▲
or value.
Key to: decrease speed / move to the lower
▼
line or value.
Confirmation key (OK).
Key and display backlighting remains active for about two minutes after the last key is pressed. When backlighting is off,
you can switch it back on again without activating any function by pressing any key.
36
60
• Speed adjustment
• Weekly speed programming
I
Display
II
X