Tabla de contenido
Detail A
Recommendations for installation
Please observe the following guidelines:
• For your own safety and protection, do
not use the telephone in locations with
extreme heat or humidity. The telephone
is designed to operate at temperatures
between +5ºC and +55ºC and is not
water-proof.
• Some parts of the telephone, such as the
rubber
feet,
varnished furniture.
• Place the telephone at least one meter
away from devices such as cordless
phones or TV sets. These devices may
cause interference with the telephone.
• Use a damp or antistatic cloth to clean
the telephone. Never use a dry cloth
(danger of electrostatic discharge) or
abrasive cleaning agents.
• When the telephone reaches the end of
its service life, dispose of it in an
environmentally
Detail B
may
leave
marks
friendly
fashion,
accordance
requirements.
General programming considerations
Functions can be programmed by pressing
the PROG key
programming operation. You can cancel an
operation (for example in the case of an
error) by simply replacing the handset
instead of pressing the PROG key
this case, the previously programmed
function will be retained.
Confirmation tone (beep)
A confirmation tone (beep) is emitted
whenever a key is pressed. When a
function
successfully, a long confirmation tone is
emitted. If programming was unsuccessful,
three short error tones are emitted.
Disabling the tones:
Press the PROG key
: Enter the code 1110
Press the PROG key
Reenabling the tones:
Press the PROG key
on
: Enter the code 1111
Press the PROG key
in
2
with
the
at the end of each
has
been
local
legal
. In
programmed
Tabla de contenido
