Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4
Turn your computer back on.
5
Windows Vista: In the Windows needs to install driver
software for your USB modem message box, select Locate
and install . . .
Windows XP: At the Found New Hardware Wizard dialog
box, select Install the software automatically, click Next,
and follow the prompts. You may see a message regarding
Windows logo testing. You can safely disregard the
message and click Continue Anyway.
Windows 2000: You may see a dialog box stating that the
Digital Signature was not found. You can safely ignore this
message and click Yes.
6
Windows Vista:
In the User Account Control message box, click Continue.
Windows XP:
In the Completing the Found New Hardware Wizard
dialog box, click Finish.
A popup notification messsage tells you that your new
hardware is successfully installed.
7
Connect the supplied phone cord to the phone jack on the
modem. Plug the other end of the cord into the wall jack just
as you would a telephone.
Finally, confirm that the installation was successful
1
Open Control Panel (Vista: select Printers and Other
Hardware) and double-click the Phone and Modem
Options icon.
2
Enter your Location information and then click the
Modems tab.
3
On the Modems tab, where you see that the USB modem is
installed, click the Properties button.
4
In the USB Modem Properties dialog box, click the Modem
tab and verify that the Maximum Port Speed is set to
115,200.
5
On the Modem or Diagnostics tab click Query Modem.
You will see a list of AT commands and responses,
indicating that your modem is properly connected.
That's it! Your installation is complete.
Now go to If Your PC Already Had a Modem on the following
page.
5
Tabla de contenido
