Selecta RE-650 Manual Instrucciones página 46

2.2.6 Condensing dispenser and condenser installation
Fix the support (44) on the frame, put the condensing dispenser (18) on the support (44). Connect the condensing
dispenser (18) and the reactor lid joint, adjust the position of support (44), tighten the fixing screw (45) and fixing nut (48).
Put the condenser (19) on the upper joint of the condensing dispenser (18), the rubber bracket (43) is locked around the
upper portion of the condenser (19), please see figure 2.2.6.2.
2.2.7 Temperature sensor installation
Put the fixing screw (49), fixing cover (50), O‐ring (51) and fixing base (70) on the sensor in turn, adjust sensor (22)
position, tighten fixing nut (49).
46