Selecta RE-650 Manual Instrucciones página 45

1）RE‐650 motor kit installation
Figure 2.2.4.3
Connect support frame (39) and motor support (2), tighten the connection screw. Install the motor kit on the fixing frame
(21) to make the motor axis and stirring paddle coaxial, fix the universal coupling (3). Adjust the position of fixing frame
(21) to make the gap between bottom of the stirring paddle and vessel bottom >30mm, fix the fixing frame (21). Then
tighten the connecting bolt and screw on the lower position of the support frame (39). Adjust the fine‐tuning components
(23) to make the level of the motor tray is horizontal. Tighten the fixing nut (30), fix the stirring paddle.
2.2.5 Installation of circulation connectors of the condenser
Please install it according to figure 2.2.5.
Figure 2.2.5
RE‐650 motor installation
Nozzle and condenser installation
1 Motor
2 Motor support
3 Universal coupling
21 Fixing frame
23 Fine‐tuning components
37 Fixing pole
39 Support frame
19 Condenser
40 Flat sealing ring
41 Connector
42 Nut
45