Safety Measures - Selecta RE-650 Manual Instrucciones

1.2.5 Hazards Related to the Instrument
Please pay attention to the following safety tips:
Reminder
1.2.6 Other Hazards
1.2.7 Safety Measures
38
Danger

Do not use it in explosive gas environment or explosive dust environment.
Warning
 Make sure the power supply is in conformity with the requirements on the name plate
 Equipotential connection has been done, do not remove inner grounding connection
line.

Before open the equipment enclosure for maintenance and repair, be sure to
disconnect the power supply, then operate it after 5s, ensure the residual voltage
release to safety value to avoid electric shock.

Do not use broken glass parts
Prohibited
 Do not use it outdoor. Get wet in the rain or splashing water will cause electrification
on metallic shell surfaces, and will cause casualties.
Warning

Do not touch the vessel surface and connection pipes with your body directly to avoid
scalding.
Note

If there's any abnormal situation when using it, please disconnect the power supply
immediately for troubleshooting or contact professional maintenance personnel.

Be aware of broken glass parts.

It may have static electricity when adding material to the vessel through feeding port
Reminder
 Do not use it in the environment mentioned above. Otherwise, it will affect its normal
running and lifetime.
 Keep well ventilated around the equipment.

Do not use it when there's no one there.

The sample in the vessel or some solvents near it may form peroxides, high
concentrations of flammable solvents, etc.

Acid, alkali steam and other corrosive materials around the equipment will damage
the equipment insulation and affecting component performance and service life.

Beware of the risk of explosion when dealing with hazardous materials or unknown
samples.
 Please wear personal protective equipment when operating this instrument, such as
protective glasses, protective clothing and gloves