Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INTRODUCTION ULTRAEASE™ UNDER SINK
MODULAR FILTRATION SYSTEM
Welcome to a New Era in Home Water Filtration Systems.
Thank you for purchasing the UltraEase™ Modular filtration system, Whirlpool Brand's latest innovative under sink water filtration
system. This system will provide you with many years of great-tasting water.
Whether from your town's water treatment plant or decaying pipes in your home, sediment rust, sand, silt and iron can be present in
your water. What's more, chlorine, lead and cyst levels may further affect the quality of your water. Your new UltraEase™ easy to con-
nect filters, effectively reduce these unwanted particles from your water supply more simply than ever.
The unit's NSF-certified filter cartridges have been tested to process up to 1,200 gallons of water before any replacement is
needed (approximately 6 to 12 months* depending on your water consumption and flow rate). See the last page for more details.
Replacing a filter is an easy "lift 'n' snap" operation, complete with an automatic shut-off water valve. And should you decide to
upgrade to a more comprehensive water filtration system, your UltraEase™ easy to connect Filter Unit's modular design allows you to
add on other components that filter chemicals for even better-tasting water. As an option, you can also add to your system the
DirectChill™ and/or the DirectHot™ units.
* The contaminants or other substances removed or reduced by this water filter are not necessarily in all users' water. Filter life varies depending on local water
conditions and the volume of water used. We recommend you change your filter every 12 months. However, it can be replaced earlier if there is a drop in
pressure at the faucet or when the monitor indicates.
If you need assistance or service, first see "Troubleshooting"
section. Additional help is available by calling 1-866-363-9472.
Monday to Friday 8:00 a.m. - 6:00 p.m. (EST) or write:
Whirlpool Water Products
P.O. Box 13150
Columbus, OH 43213-0150
Please include a daytime phone number in your correspondence.
Dealer name
______________________________________________________________________________________________________
_
Address ___________________________________________________________________________________________________________
Phone number_________________________________ Model number_____________________________________________________
Purchase date______________________________________________________________________________________________________
INSTALLATION REQUIREMENTS
IMPORTANT:
Observe all governing codes and ordinances. Check location where the faucet will be installed. Make sure you have everything
necessary for correct installation. It is the responsibility of the installer to comply with installation specifications and with state and
local plumbing codes.
The faucet requires a 1-3\8'' (3.5cm) diameter opening in the sink or countertop. The faucet can be installed in place of the sink
spray hose. If faucet is not to be installed in sink spray hose opening, it is recommended that a qualified installer be contacted to
drill a hole through your sink or countertop. Thickness of countertop at the hole must not exceed 1-3/4'' (4.4cm).
Cold water supply connection must be available. See ''Water supply requirements'', section. Water connections use easy to connect
fittings which do not require sealing compounds to keep them from leaking.
ASSISTANCE OR SERVICE
For installation and service, call: 1-866-363-9472 or visit our
website at www.whirlpool.com.
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your appliance to
help you obtain assistance or service if you need it. You will
need to know your complete model number. You can find this
information on the packaging.
3 3
Tabla de contenido
