Gigabyte 3D Cooler Ultra GT GH-PCU31-VH Guia De Instalacion página 5

Installation Instructions for Intel Pentium 4 Clips
Figure 1
Please add an adequate layer of heat sink paste on the
surface of the CPU.
Figure 1 Figure 2
Figure showing the correct installation of the cooler atop
the CPU.
Figure 3
Hook the clip on one end of the cooler with the insert
Figure 2
space at the CPU base (as seeing left Figure 3).Firmly
push downwards to clip the cooler end in place. Do the
same for the other clip of the cooler to secure cooler in
place.
Figure 4
Figure 3
Connect the yellow 3-pin connector cable of the cooler to
the CPU fan connector located on the motherboard.
Clips Installation is now complete.
Figure 4
Note: Please refer to page 8 & 9 for power installation
and installation of the fan speed controller.
- 5 - GH-PCU31-VH