Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EMPTYING DUST CUP
1.
Pull up on dust cup
release latch and lift
dust cup off canister.
Empty dust cup after
each use.
(See Figure 9)
2. Hold dust cup over
a trash bin and press
the release latch
on the bottom.
(See Figure 10)
3. Turn dust cup over.
Press top dust cup
release latch to
access dust screen
and remove built-up
dust and debris as
required.
(See Figure 11)
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
PAGE 3 OF 9
MAINTENANCE
Figure 9
Dust Cup
Release
Latch
Figure 10
Release
Latch
Figure 11
Release
Latch
1-800-295-5510
CLEANING FILTERS
PRE-MOTOR (FOAM AND FELT)
With the dust cup removed,
take out and rinse foam and
felt filters with water.
(See Figure 12)
NOTE: Wash filters
every three months
to keep the suction
strong. Rinse air filters
and allow them to
air dry completely.
Tap loose dirt from
the foam filters as
needed between washes.
POST-MOTOR (HEPA)
To access the HEPA filter,
reach under the grill and
pull the filter access latch
to remove the grill. Remove
and rinse the HEPA filter with
water only. Let all filters air-dry
completely before reinstalling.
(See Figure 13)
BRUSHROLL MAINTENANCE
1.
Detach motorized floor
nozzle from portable
Lift-Away
canister.
®
(See Figure 14)
2. Remove any string,
carpet fibers or hair
that may be wrapped
around the brushroll.
(See Figure 15)
uline.com
Figure 12
Figure 13
Figure 14
Figure 15
0820 RH-8831
Tabla de contenido
