Novellini Sole Serie Instrucciones De Uso página 11

1
At this point the towel warmer is activated until the desired
temperature setting.
Automatic timer setting:
By pressing the symbol shown you enter the timer setting menu.
The figures in the ON section begin to Flash, with the buttons (1)
and (2) increase or decrease the start time. Press (3) to confirm.
Repeat the sequence for the minutes and for the OFF section
which determines when the radiator will be switched off.
1
When finished, press the symbol (4) to return to the main menu.
When the automatic time is active, the menu appears as below.
To deactivate it at any time press the symbol shown.
Turbo function:
4
By pressing the symbol shown you enter in the "turbo" mode".
2
The TURBO function on the SOLE radiator provides for
continuous operation, regardless of the room temperature.
For safety reasons the TURBO function limits itself to a cycle
of 4 hours.
After 4 hours the radiator will continue to operate normally
regulating the thermostat according to the room temperature
set on the display.
To discontinue the TURBO function (before the 4 hours
from switching on have passed) switch off the radiator by
pressing (5).
4
3
When next switched on, the radiator will operate normally.
2
-11-
ENGLISH
5