Konig Security SEC-CAMIP20 Guía De Instalación Rápida página 2

Introduction:
Professional network IP CCTV colour camera with weatherproof housing and IR
LEDs for night vision. Ideal for live monitoring via internet. Including software,
bracket and power adapter.
Note: Quick installation guide in multiple languages. Complete manual only in
English. Software only in English.
System requirements:
• 10 Base-T Ethernet or 100 Base-TX Fast Ethernet
• CD-ROM drive
• Intel Pentium II 266 MHz CPU or above
• 32 Mb memory (64 Mb recommended)
• 800 x 600 VGA resolution or above
Camera installation:
1. Slide the camera into the camera holder.
2. Line up mounting holes of the camera holder and the bracket.
3. Insert thumb screw, adjust camera to desired angle and tighten screw.
1. Select a mounting location.
Use the mounting bracket
as a guide and mark the
screw holes with a pencil.
2. Align the bracket over the
holes or wall anchors and
tighten the screws to secure
the bracket to the wall or
ceiling.
or
Attach Stand to
Mounting Surface
1