Tabla de contenido
Add the ingredients into the bottle without exceeding the maximum level
indicated:
* 400ml for thick mixtures
* 600ml for liquid preparations
Warning : Do not pour boiling liquids (over 80°C/176°F) into the bottle.
Place the blades unit (E4) on the top of the bottle, fit the locking ring (E5),
and lock it by rotating to lock notch in the clockwise direction (Fig. 8).
Make sure the blades unit is locked correctly : the arrow on the locking
ring should be aligned with the arrow on the bottle.
Turn the bottle upside down and position it correctly on the motor unit.
Lock it by rotating it in the clockwise direction. A bottle logo will appear
on the screen and a bip signal will sound
USING YOUR APPLIANCE
Put the appliance on a flat, stable, heat-resistant surface away from heat
sources or water splashes
Plug your appliance and select your program or manual settings (time
and speed) and press the start/ stop button : with the Jar (A) you can
change the blending speed from 1 to 9 by pressing the setting +/- buttons
(L). « H »is the maximum speed. You can also set up the working time by
pressing the setting +/- buttons (L) between 5 seconds and 3 minutes.
With the On The Go bottle (E) you can manage the blending speed from
1 to 7 by pressing the setting +/- buttons (L). You can also set up the
working time by pressing the setting +/- buttons (L) beteen 5 seconds and
90 seconds.
Wait for the blender to stop automatically. If you want to stop the blender
before the automatic end of the program, press on the start / stop button.
Do not shake the motor unit or the jar when the blender is in use.
When you use the pusher or the middle cap, hold the jar by its handle to
avoid it falling.
When the blender is in use, do not use any other accessory than the
pusher to avoid damaging the jar.
.
EN
3
Tabla de contenido
