Stiga GM Li 7.2 Manual De Uso Y Mantenimiento página 15

• This machine may cause serious injuries. Please
read the instruction manual carefully as to the cor-
rect handling, the preparations, the maintenance
and the proper use of the hedge trimmer. Familiar-
ize yourself with the machine before the first use
and also have yourself introduced to practical use
of the machine.
• The cutting tool continues to run after the device
is switched off.
• Turn off power before cleaning.
• Beware! Keep your fingers away from the cutting
area!
• Only switch on the device if your hands and feet
are away from the cutting tools.
• Remove all debris from the working area before
use and pay attention to such debris while working!
• Turn the machine off before transporting and wait
until the blade stops moving. Maintenance and
cleaning should be performed only when the ma-
chine is turned off.
• Children and teenagers under 16 years of age
must never use this device!
• Never permit children or persons who are not
familiar with the operating instructions to use this
device.
• Statutory regulations can restrict the age of the
operator.
• Be aware of third persons in the work area.
• Use of the machine must be prevented is people,
especially children and house pets are present.
• Only use the shear in daylight or sufficiently bright
artificial illumination.
• The clippers must be subjected to regular main-
tenance and checks. Damaged blades must be
replaced as a pair. Professional repair is required
if damage occurs due to impact.
• The machine should be inspected and maintained
regularly by a responsible repair service only.
• Wear suitable working clothes, i.e. protective glass-
es, protective means for ears, non-slippery shoes
and working gloves. Do not wear broad clothes
which could be caught by the moving parts.
• After you finish using the clippers and before
cleaning them, it is necessary to ensure that the
machine cannot be accidentally turned on, such
as by unlocking the switch.
• Check the cutting unit regularly for damage
• Never hold the clippers by the blades, you may
run the risk of injury even when the clippers are
not moving!
• Never touch moving blades in an attempt to re-
move debris or if the blades are blocked. Always
switch off the device.
• Keep the machine away from children and store it
EN | Operating Instruction
• When working with the shears, always take a sta-
• Do not use shears with a damaged or excessively
• Ensure that all protective devices and handles
• Always use the protective part designed for the
• Before starting the work, make yourself famil-
• Only use the spare parts and accessories recom-
• Note that the user shall be responsible himself for
• Prior to using the machine, inspect it visually for
• Never use the machine with damaged coverings
• Eye protection, long pants, and sturdy footwear
• The machine should not be used in case of poor
• Always switch off the machine
• Always ensure that the ventilation openings are
• Always maintain your balance to stand securely
• Warning! Do not touch moving dangerous parts
• A tingling feeling or numbness in the hands is
GB-5
in a safe place.
bile standing position, particularly when you are
using steps or a ladder.
worn-out cutting part
are installed on the machine. Never try to put an
incomplete machine in operation.
blade when transporting and storing the shears.
iar with the surroundings and possible dangers
which you may not hear because of the noise.
mended by the manufacturer.
accidents and hazards that result to other people
or their property.
damaged, missing, or incorrectly attached protec-
tive devices or coverings.
or protective devices or without the covering or
protective devices.
must be worn the entire time the machine is used.
weather conditions, especially in case of lightning.
- if the machine is left unattended.
- before inspecting or working on the machine
- after contact with foreign objects
- if the machine begins to vibrate strangely
kept free of foreign objects.
on slopes. Walk, don't run.
before the machine has been switched off and the
moving dangerous parts have come to a complete
standstill.
sign of excessive vibration. Limit the operating
time, take sufficiently long work breaks, distribute
the work between several people or wear anti-
vibration gloves when using the tool for extended
periods.