Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Damaged or defective parts must be rejected
otherwise be void.
Assembly conditions for a weka assembly team
If you wish for help assembling your cabin and choose to employ a weka assembly team, weka Holzbau
GmbH will carry out the following services for you:
Assembly means putting together (installation) of the individual parts supplied. It does not include treating
them with a wood protection agent, the delivery and assembly of accessories and accessory parts. Electrical
connections are not included in the assembly service.
The items to be assembled must be located at the installation site/location/base area. Transport of the article
or the individual parts over a distance greater than 5 m or to another level is not included in the assembly
price quoted. The substrate must be stable, horizontal and level.
In the event of doubt, reference should be made to DIN 18202 'Level tolerances in building construction',
tab. 3, row 3, with a maximum height difference at the furthest points of approx. 10 to 11 mm.
All preparatory work must have been carried out in accordance with the technical
assembly begins. The substrates/floors/foundations constructed or selected by you must be suitable for the
assembly.
Name and address of the manufacturer
Manufacturer:
weka Holzbau GmbH
Johannestr. 16
D-17034 Neubrandenburg
Tel.
Fax
E-mail [email protected]
Transport and storage
The product is delivered stacked on pallets.
After unpacking and checking, handle the parts as follows:
Protect the wood against
long-term, direct sunlight
Incorrect storage may result in:
Technische Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.
: (0049)-395 429080
: (0049)-395 4290883
moisture
- Cracks
- Distortion and warping
Rotting (infestation by pests etc.)
-
prior to installation
contact with the ground
5
or the warranty claim will
regulations before
Copyright HRB 3662
Tabla de contenido
