Xiaomi Aqara G3 CH-H03 Manual De Uso página 6

Add camera
3
Connect to Aqara Home
Open the Aqara Home app, click "+" in the upper right corner of
the home page, select Camera Hub G3, and follow the
instructions of the app to operate. A er a successful
connection, the status indicator of the device will be blue.
If the device addition fails, please confirm the following points:
* The Wi-Fi name or password contains an unsupported special character,
such as, @, #, %, -, $, etc., resulting in a failure to connect to the router.
Please change it to a commonly used character and try again.
* If the camera cannot recognize the QR code generated by the mobile
phone. Please make sure that the screen size of the mobile phone is not
less than 4.7 inches, and make sure that you don't use the backlight of the
camera to shoot the QR code.
* Check whether the router has enabled the Wi-Fi anti-squatter setting,
which causes the camera to be unable to connect to the Internet.
* Check whether the router has enabled AP isolation, which leads to the
failure to search the camera on the mobile phone in the LAN.
Connect to Apple HomeKit
Open the Apple Home app, click the "+" in the upper right
corner to go to the Add Accessories page, scan or manually
enter the HomeKit setting code at the bottom of the camera,
and bind the device to HomeKit.
Instructions for HomeKit Addition Failures
* It prompts that "Accessory failed to be added". Due to repeated adding
failure, the error message cached in the iOS system cannot be released.
Please restart the iOS device and reset the camera and try again.
* It prompts that "Accessories have been added". A er restarting the iOS
device and resetting the camera, manually enter the HomeKit setting code
to add it again.
4