Drill Safety Warnings - KRESS KUY02P Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
g)
Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
h)
Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected
situations.
5)
Service
a)
Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.

DRILL SAFETY WARNINGS

1 ) Safety instructions for all operations
a)
Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
b)
Use auxiliary handle(s).Loss of control can
cause personal injury.
c)
Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory or fasteners
may contact hidden wiring or its own cord.
Cutting accessory or fasteners contacting a "live"
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
2)
Safety instructions when using long drill
bits
a)
Never operate at higher speed than the
maximum speed rating of the drill bit. At
higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting
the workpiece, resulting in personal injury.
b)
Always start drilling at low speed and with
the bit tip in contact with the workpiece.
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting
the workpiece, resulting in personal injury.
c)
Apply pressure only in direct line with the
bit and do not apply excessive pressure.
Bits can bend causing breakage or loss of
control, resulting in personal injury.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual.
Wear ear protection
Wear eye protection
Wear dust mask.
Double insulation
Wear protective gloves
Before any work on the machine itself,
pull the mains plug from the socket
outlet.
Hammer drilling
Drilling
Wood
Steel
Plastic
Concrete
Brickwork
High speed
Low speed
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
5
EN
Tabla de contenido
loading

Tabla de contenido