Protecting The Environment; Technical Data - Black+Decker GKC1000L Manual De Instrucciones

ENGLISH
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do not
use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust from
the interior (when fitted).
Cleaning
Regularly remove the chain access cover (11) and remove
u
any debris that has become trapped.
Regularly clean the ventilation slots with a clean, dry paint
u
brush.
To clean the tool, use only mild soap and a damp cloth.
u
Never let any liquid get inside the tool and never immerse
any part of the tool into liquid.
Oiling
Regularly oil the oiling points (15) as indicated in figure D.
u
Transport
Always transport the tool with the jaws closed and the
u
latch (5) in the locked position.
Saw Chain sharpening
If you are to get the best possible performance from the
tool it is important to keep the teeth of the saw chain sharp.
Guidance for this procedure is found on the sharpener
package. For this purpose we recommend the purchase of
BLACK+DECKER saw chain sharpening kit A6039 (available
from BLACK+DECKER service agents and selected dealers).
Replacing worn out saw chains
Replacement saw chains are available through retailers or
BLACK+DECKER service agents. Always use genuine spare
parts.
Saw chain sharpness
The saw chain cutters will blunt immediately if they touch the
ground or a nail while cutting.
Saw chain tension
Regularly check the saw chain tension.
What to do if your chainsaw needs repair
Your tool is in accordance with the relevant safety
requirements. Repairs should only be carried out by a
qualified person using original spare parts otherwise this may
result in considerable danger to the user. We recommend you
keep this user manual in a safe place.
10
(Original instructions)
Storage
When the tool will not be used for several months, wipe
any metal components with oil. Ideally, leave the battery (6)
connected to the charger.
Proceed as follows:
Fully charge the battery (6).
u
Remove the battery (6) from the tool.
u
Store the tool and battery (6) in a secure and dry location.
u
The storage temperature must always remain in the range
of +5°C to +40°C. Place the battery (6) on a level surface.
Before using the tool after prolonged storage, fully charge
u
the battery (6) again.

Protecting the environment

Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com.

Technical data

Voltage V
DC
Chain speed (No-load) min
-1
Maximum diameter of cut mm
Weight kg
Battery
Voltage V
DC
Capacity Ah
Type
Charger
Input Voltage
V
AC
Output Voltage
V
dc
Output Current
mA
Approx. charge time
h
Guaranteed sound pressure level measured according to EN60745:
LpA (sound pressure) 74 dB(A), uncertainty (K) 3 dB(A)
LwA (sound power) 85 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Cutting freshly felled softwood (a
GKC1000L H3 GKC1000LB H3
18 18
1.9 1.9
100 100
3.1 3.1
GKC1000LB not
BL2018
included
18
2.0
Li-Ion
GKC1000LB not
906349** TYPE 1
included
200–240
8–20
1000
2
)= 4.0 m/s², uncertainty (K) = 1.5 m/s²
h