König Electronic KN-TTUSB100 Manual De Uso página 3

Application:
• Convert analogue music on phonographic disk to digital format.
Follow the description to record music from a vinyl record.
A. Connect the R,L → R,L cable to the
turntable and USB preamplifier.
B. In order to prevent a HUM noise caused
by mismatching of the turntable and
USB preamplifier, it is recommended that
the user connects the grounding cable
between the 2 devices.
C. Connect the USB cable to the PC (or
notebook) and USB Pre-Amp as the
illustration shows.
When the USB connection is ok, the PC
will auto-detect this unit as "USB
PREAMP". You can then start to use this
device on your computer
Operation:
A. Connect the turntable to the USB preamplifier
B. Play the vinyl record
C. Select the MM/MC position for the different types of pickup heads for turntables
D. Now you can start recording with your audio grabbing software on a PC /notebook
• PHONO preamplifier (Stand Alone or operated with PC at the same time):
A. Connect the audio cable R,L → R,L to
the turntable and USB Pre-Amp.
B. In order to prevent a HUM noise caused
by mismatching of the turntable and
USB preamplifier, it is recommended that
the user connects the grounding cable
between the 2 devices.
C. Get the USB → mini USB cable and
connect your PC and the USB Pre-Amp.
Please make sure the connection is
good because the USB preamplifier is
powered via the USB port.
D. Connect the 3.5mm → Audio R, L cable,
and connect the "Line In/Pre-Amp Out"
port and the Audio R,L end to your stereo
amplifier.
E. Set the slide on the USB preamplifier to the "Pre-Amp Out" position
PC
USB
Front
BACK
MM
PC
Pre-Amp
Out
USB
Front
BACK
MM MC
3
Pre-Amp Line
Out In
Phono In
MC
Phonograph player
Line
Amplifier
In
Phono In
Phonograph player