Safety Features - Kenwood IH470 Serie Instrucciones

3 When the set time is complete, the
beep will sound and the power will
change to standby mode.
4 After the timer cooking has
been completed; the hob will
turn off automatically and will
be on standby mode.

safety features

• The induction hob will change to
standby mode if it is not operated
within one minute.
• In use, unless a suitable pan of at
least 12cm diameter is used a
beep will sound for approximately
1 minute. If an appropiate pan is
not placed onto the surface in this
time the induction hob
automatically change to standby
mode.
• If the appliance overheats or pans
boil dry, the induction hob
automatically enters a protective
condition where its heating is then
regulated. If the overheating
continues, the appliance may
display a protection code (see
troubleshooting guide).
• During use if there are problems
with the mains supply, induction
hob automatically enters a
protective state and displays a
protection code.
• Unplug the appliance and wait for
supply to return to normal (see
troubleshooting guide).
• If the induction hob is cooking and
no button is pressed after 2 hours
it will automatically change to
standby mode.
• Once the pan is moved away, the
hob stops cooking.
safety lock/child lock
The induction hob has a safety
lock which prevents the hob from
being operated.
• To lock the hob – press the '+'
and '-' buttons at the same time. In
this mode only the On/Standby
button will work.
• To unlock the hob – press and
hold the '+' and '-' buttons for 3
seconds.
8