Timer Mode - Kenwood IH470 Serie Instrucciones

When the time has been set, it will
flash four times and then the
display will remain steady,
confirming that is set. Alternatively
just press 'time' again to confirm.
After that the clock will count
down; and the display will show
alternately the remaining time and
the set power or temperature.
The maximum cooking time which
can be set is 3 hours.
Once the cooking time has been
set, the timer will begin counting
down after 5 seconds.
During set-time cooking, pressing
+ or - or turning the control knob
will change the power or
temperature and will cancel the set
time.
After fixed time cooking has
been completed, the "on/off"
button needs to be pushed
before more cooking can be
done.
6 Turbo function.
Pressing 'turbo' during cooking
boosts the cooking power to 2100
watts for 30 seconds ; after which
the hob changes back to the
earlier set power or temperature.
Notes: When the induction hob is
working, there will be a high
frequency intermittent sound and
the fan will operate. This is normal.
Once the pan is taken off the hob,
the hob stops heating immediately
and a beep will sound every 2
seconds.
The existing display/settings will
flash.
If the pan is not put back within 60
seconds, the hob will turn off
automatically and will be on
standby mode.
7 Press the on/standby button when
you have finished cooking, the
cooker will stop heating and return
to standby mode. LED is flashing
and shows "H" while the plate is
still hot and then shows "L" while
the hob is cooling down.
• As this induction hob operates
slightly differently to a traditional
hob, some adjustments to the
expected cooking
times and temperatures may be
necessary to achieve the desired
results.
hints
• To reduce the cooking time, you
can turn the power control to the
max position when you turn the
appliance on. After a short time
you can set the power control to
the required position.
• After a short period of use,
experience will teach you which
setting is the right one for your
needs.
• Pan contents heat more quickly
with an induction hob.

timer mode

Note: if the timer is not set, the
hob will operate for a maximum
of 2 hours continuously and will
then change to standby mode.
The timer can only be set after an
initial power level has been selected.
Using the touch control buttons -
touch the button firmly with the
flat part of the fingertip. To
change the time by several
minutes touch the button for
each minute of adjustment.
1 To set the timer press the '+' or '-'
button. The timer display will show
'0:00' and flash. To amend the
time press the '+' or '-' to change
the time by 1 minute per press. To
quickly adjust the time in 10 minutes
increments, hold your finger on the
'+' or '-'. The timer range is 1
minute to 3 hours.
• The timer can be adjusted at any
time by pressing the '+' or '-'
buttons and then adjusting the
time.
• The timer function can be cancelled
at any stage by re-setting the time
to '0' or by pushing the menu
button.
2 Once the cooking time has been
set, the timer will begin counting
down after 5 seconds.
7