Midland ENERJUMPTRUCK Manual De Usuario página 13

CHARGE LEVEL INDICATOR
Press the TEST button to check the battery level.
When charging, the indicator lights will fl ash one by one.
The number of steady indicator lights show the battery capacity:
Indicator lights No light
Battery capacity 0%
All indicator lights are off when charging is completed.
CHARGING ENERJUMP TRUCK
We recommend to fully charge Enerjump Truck every 6 months.
• Plug the wall adaptor into the universal socket.
• Connect the 14V-1A input port of Enerjump Truck to the other end of the wall charger.
or
• Plug the car adaptor into the socket of the cigarette lighter.
• Connect the 14V-1A input port of Enerjump Truck to the other end of the car adaptor.
SMART JUMP START SYSTEM™
The device has a built in Smart Jump Start System.
This system has the following features:
• Automatically recognizes the starting voltage
• Automatically protects the device against short circuits
• Automatically prevents the polarity inversion
This system is always active.
It can be deactivated by manually selecting the starting voltage (keep pressed for 2 seconds the 12V/24V
Switch)
ATTENTION: In this case only short circuits protection is still available.
5 fl ashing 1 steady
10% 20%
12/24V
2 steady 3 steady 4 steady
40% 60% 80%
12/24V
5 steady
100%
9