Safety Signs; Decals; Main Components; Product Identification Label - Stiga ST 201 Manual De Instrucciones

Quitanieves conducido de pie
Ocultar thumbs Ver también para ST 201:
Tabla de contenido
EN
2.3

SAFETY SIGNS (4)

Safety signs on the machine are designed to 
inform the user as to the correct conduct to be
maintained when using the machine, in particular
for operations which require special caution and
attention.

2.3.1 Decals (4)

The decals (4:A) are affixed on the corpo mac-
china.
WARNING! If the regulations are not fol-
lowed, there is a risk of danger to life and
machine breakdown.
Read the instruction manual before using
the machine.
  Keep bystanders at a safe distance.
Wear protective gloves
  Always use hearing protectors.
  Thrown object hazard.
  Keep  hands  and  feet  away  from  rotating 
parts. Risk of death and maiming.
  Avoid  injury  from  the  rotating  auger,  keep 
hands, feet and clothing away.
  Do not touch any rotating parts before the 
machine has stopped.
  Disposed product shall be recycled accord-
ing to local regulations.
PLEASE STOP HERE
Any damaged or illegible decals must
be replaced.
Order replacement decals from an au-
thorised assistance centre.
4
Handle insertion limit decal.
ENGLISH
2.4

PRODUCT IDENTIFICATION LABEL

The identification label holds the following data 
(see fig. 1):
1
CE conformity marking

2. Manufacturer's address

3
Acoustic power level
4. Type of machine
5. Serial number
6. Year of manufacture
7. Power supply frequency and voltage
8. Engine power
9. Dual insulation
10. Article code
11. Weight in Kg
  Write your machine's serial number  in the
space provided in the figure (1:142).
The identity of the product is determined by two 
parts:
1. The machine's item and serial numbers:
2. The engine's model, type and serial num-
bers:
3.
  Use these means of identification whenev-
er you contact an authorized service work-
shop.
The example of the declaration of conform-
ity can be found on the second to last page 
of this manual.
2.5

MAIN COMPONENTS (1)

The machine is made up of the following main
components (see fig. 1):
A. Handle
B. Starter switch locking device
C. Starter switch
D. Plug with cable
E. Cable support
F. Handgrip locking device
G. Handgrip
H. Shank
J. Stem locking device
K. Auger housing
L. Auger
(Translation of the Original Instructions)
Tabla de contenido
loading

Este manual también es adecuado para:

As 31 e

Tabla de contenido