LGB 12040 Manual De Instrucciones página 3

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
B
A
Fig. 1
RW
B
Fig. 2
134 993
+
132 654
132 653
135 873
+
LW
132 654
135 086
68 501
Mounting a Left-hand set of points
Remove cover (Fig. 2), connect leads made from „by
the meter" wire 50140. Before the cover is replaced,
make sure that the operating pin of the rotor coincides
with the elongated hole of the points connecting rod
(B, Fig. 2).
The adapter escapes, it the switch tie rod has a
slotted hole.
Mounting a Right-hand set of points
The Base plate (B, Fig. 2) should be transfered to
the opposite side and the points latern housing also
changed. Further assembly as for left-hand points. The
drive housing is fitted to LGB-Points drive by means of
the screws enclosed.
Bild 1:
A Adapter for point track rod with pin only.
3
loading