Melchioni Family BARETTO NEW Manual página 9

Plastic bags, nails, etc. Should be kept out of the reach the operation manual carefully and check that the
●
rating data on the rating nameplate corresponds to your power supply.
This refrigerator can only be used in the use of which it was designed. The manufacturer will not respond for
●
any damage due to improper use or repairs made by unqualified personnel.
Before cleaning the refrigerator, make sure it is unplugged. Never clean the unit with an acid preparation,
●
medical, dilution, gasoline, oil or any other kind of chemical substance that could damage the refrigerator.
Repair should only be made by authorized service centers.
●
Caution
4. To reduce the risk of fire, replace only with same type fuse.
5. Free standing installation only.
6. Do not use extension cords.
Warning
If the supply cord is damaged, it must be replaced by the manufacturer or service agent or similarly qualified
●
person in order to avoid hazard.
Please screw off the door before throwing it away.
●
Please keep the appliance away from any flammable substances.
●
To avoid a hazard due to the instability of the appliance, it must be fixed according to the instructions.
●
Do not use electrical appliances inside the food storage compartments of the appliance.
●
This appliance is not intended for use by persons (including children) with reduced physical.
●
Children should be supervised to ensure that they do not play with the appliance.
●
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
●
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
●
OPERATION OF REFRIGERATOR
Clean the inside before use.
●
Fix the shelves properly according to the instruction.
●
When first time use (or haven't used it for a long time), you should adjust the temperature to minimum and
●
have the cabinet empty running for 2 hours, and then put your drinks in it and adjust the desired
temperature.
When the power is connected, cooling system starts to work. The TEMP-ADJ button (thermostat) is set on
●
certain position, which means that if the temperature in the drinks cooler reaches the point set, Self-control
Temperature System stops cooling system so the temperature in the cabinet rises gradually.
It is recommended to install the mini fridge in a place where the temperature is between 10-25° C. If the
●
ambient temperature is above or below the recommended temperature, the performance of the unit may be
affected. For example, having an external extreme hot or cold condition, the internal temperature may vary
and not maintain the indicated range of 5-20° C.
The internal temperature may vary even if the internal light is on or off or if the bottles are located on the top,
●
middle or bottom of the mini fridge.