Sears Kenmore Elite MICROCLEAN 665.1482 Serie Manual De Uso página 17

Options
Hi Temp Wash
Raises main wash temperature to improve
cleaning for loads containing tough, baked
on food.
Sani Rinse
Sanitizes dishes and glassware in accordance
with NSF International NSF/ANSI Standard
184 for Residential Dishwashers. Certified
residential dishwashers are not intended for
licensed food establishments. Only sanitizing
cycles have been designed to meet the
requirements of the NSF/ANS1184
performance standard for soil removal and
for sanitization efficacy. There is no intention,
either directly or indirectly, that all cycles on
a NSF/ANS1184 certified dishwasher meet
the NSF/ANS1184 performance standard for
soil removal and for sanitization efficacy.
The Sani Rinse indicator indicates at the end
of the cycle whether the Sani Rinse option
was successfully completed. If the indicator
does not activate, it is probably due to the
cycle being interrupted.
Smart Dry
TM
Turnsthe heat element on at the end of the
wash cycle. Use rinse aid with or without the
Smart Dry
TM
option for best drying results.
Plastic items are less likely to deform when
loaded in the top dish rack.
Smart Dry
TM
Plus
Smart Dry
TM
Plus is used with Smart Dry
TM
to
extend the heated drying time. For the very
best drying performance, use rinse aid and
the Smart Dry
TM
Plus option.
Top Rack Only
For added convenience, use for washing a
small load of dishes in the top rack to help
keep the kitchen continuously clean.
Bottom Rack Only
For added convenience, use for washing a
small load of dishes in the bottom rack to
help keep the kitchen continuously clean.
Can be selected
with
SmartWash ®HE
Pots & Pans
Normal Wash
SmartWash ®HE
Pots & Pans
Normal Wash
Top Rack Only
Bottom Rack Only
Available with any
cycle except Quick
Rinse
Available with any
cycle
Cannot be used with
®
TurboZone option
Available with any
cycle
Cannot be used with
®
TurboZone option
What it does
Raises the main wash
temperature from 120°F
(49°C) to 140°F (60°C).
Increases the main wash
temperature from 120°F
(49°C) to 140°F (60°C) and
the final rinse from 140°F
(60°C) to 155°F (68°C).
Turns the heat element on at
the end of the wash cycle.
The Smart Dry
TM
Plus option
must be selected for any cycle
and will momentarily flash for
cycles that do not allow it.
Slightly faster wash for
smaller loads
Slightly faster wash for
smaller loads
_The maximum additional water used for any combination of options is 2.6 gal. (9.8 L).
Added time
to cycle
0:00 to 0:30
0:10 to 2:00
0:11 to 0:48
0:42 to 1:20
Saves up to
0:07
Saves up to
0:24
Added
Water **
Gallons
(Liters)
0 to 2.6
(0 to 9.8)
0 to 2.6
(0 to 9.8)
17