Brinno HEALTH DEFENDER Guía Rápida página 9

4. Select the area where you want to set
up the camera, wipe it clean with the
other cleaning pad, glue it on the wall
and let it dry for 24 hours.
5. After 24 hours, install the camera to
the camera mount set and then install
the whole set into the wall clip.
6. Do not tighten the mount adjuster of
the camera mount completely at this
time, use the ball joint of the mount to
find a suitable shooting angle.
∆ You can also use the included viewfinder to help
you find a good view angle.
∆ If the screen turns off while you are setting up the
shooting angle, press the OK button (
reactivate the preview screen.
7. Turn on the camera and press the
shutter button (
) to
) to start shooting!
4
5
6
7