Remaining Risk Factors - HOLZMANN MASCHINEN WP 20PLUS Instrucciones De Servicio

 Keep your work area dry and tidy! An untidy work area may cause accidents.
Avoid slippery floor.
 Make sure the work area is lighted sufficiently!
 Do not overload the machine!
 Always stay focused when working. Reduce distortion sources in your working
environment. The operation of the machine when being tired, as well as under the
influence of alcohol, drugs or concentration influencing medicaments is forbidden!
 Do not climb onto the machine
 Attach the machine to the underground!
 Only one person shall operate the machine
 The machine must be operated only by trained persons (knowledge and
understanding of this manual), which have no limitations of motor skills
compared with conventional workers
 Do not allow other people, particularly children, to touch the machine or the
cable. Keep them away from your work area!
 Wear suitable work clothes! Do not wear loose clothing or jewelry as they might
be caught and cause severe accidents.
 Wear a hair net if you have long hair
 Loose objects can become entangled and cause serious injuries!
 Use personal safety equipment: safety goggles, safety shoes S1, work wear,
safety gloves (EN 388, class 3111) when working with or on the machine.
 Do not exceed in no case the max. pressing force of the shop press.
 Make sure that the workpiece surface, the stamp and the workpiece are free of
lubricants and generally in a clean and dry condition.
 Use the Workshop Press exclusively on a solid, stable, level and non-slippery
surface!
 Keep hands and feet away while operating from the working area of the pressure
stamp.
 Ensure that the workpiece support as well as the workpiece are centrally
positioned.
 Never leave the loaded press unattended and do not stand directly in front of the
press during the pressing process.
 Store the press when not in use in a dry area with a retracted ram

11.3 Remaining risk factors

It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest attention is
required. A safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate certain residual risk
factors totally. The following hazards may arise in connection with the machine´s construction
and design:
• Risk of injury to the eye by flying debris, even with safety goggles.
• Risk of injury to the hands / fingers (bruises!)
These risk factors can be minimized through obeying all security and operation instructions,
proper machine maintenance, proficient and appropriate operation by persons with technical
knowledge and experience.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
WARNING
SAFETY
17
WP 20PLUS / WP 30PLUS