Kohler K-1167 Guia De Instalacion página 6

2. Prepare the Site
Wood Construction
NOTICE: Adequate floor support must be provided. Consult the roughing-in sheet packed with your
whirlpool for specific floor loading requirements.
NOTICE: Do not support the load weight of the whirlpool by the perimeter of the rim. To avoid damage
to product, support the whirlpool by its base or feet.
Make sure the flooring offers adequate support for your whirlpool, and verify that the subfloor is
flat and level.
The bath may be used in an alcove installation.
Construct 2x4 or 2x6 stud framing designed for your particular installation.
Install an access panel to allow the pump to be serviced.
Position the plumbing according to the roughing-in information. Cap the supplies, and check for
leaks.
1167604-2-A
Position the
rough plumbing.
Verify that the subfloor
offers adequate support,
and is flat and level.
Construct 2x4
stud framing
according to
roughing-in
information.
Typical access
panel
6 Kohler Co.