Kohler K-T9518 Guia De Instalacion página 4

Escutcheon
Round Handle
Control Knob
O-Ring
Grip Ring
2. Install the Handle
Round Handle
Press the control knob onto the transfer valve stem and secure the
knob with the screw. Use the long screw for thick wall
installations and the short screw for thin wall installations.
Carefully install the O-ring into the first groove in the control
knob.
Fit the grip ring into the second groove in the control knob.
Press the cap firmly onto the control knob so the cap detent is in
line with one of the large detents on the escutcheon.
Check the transfer valve for proper operation.
Lever Handle
Carefully install the O-ring into the groove in the handle
assembly.
Fit the handle assembly over the valve stem so the lever handle
points to one of the large detents on the escutcheon.
Press the cap firmly onto the handle assembly so the cap detent
points to the lever.
Check the transfer valve for proper operation.
088128-2-E
Lever Handle
Assembly
Screw
O-Ring
Screw
Cap
Apply silicone
Detent
lubricant if needed.
4
Apply silicone
lubricant if needed.
Kohler Co.