Hygiene And Cleaning; Disposal - mamivac Breast shield S Manual De Instrucciones

mamivac
®
• to suction other body fluids, such as blood, secretions or mucus
• to suction outside the medical field, such as corrosive, flammable
or explosive liquids
• on other living things

4. Hygiene and cleaning

Before you use the suction kit for the first time, boil components c) to f) in
boiling water for at least 15 min. or use a steam disinfection device, like a sterilizer
for instance. Please observe the manufacturer's corresponding notes.
• Do not use chemical disinfection baths, solvents or abrasives.
• All parts of the suction kit, except for the air tube and the tube connection, can
be cleaned with commercial washing-up liquids by hand or in the dish washer.
• Prior to using the kit the next time, clean the parts which came into contact
with milk. It is not necessary to clean the air tube and the tube connection. It is
sufficient to wipe off these parts with a damp cloth.
• After cleaning, rinse components c) to f) thoroughly with lukewarm water to re-
move residues of the washing-up liquid, especially on those components which
come into direct contact with breast milk. You might use a brush to clean areas
which are difficult to reach.
Prior to assembling the pump, make sure that the diaphragm
is completely dry and undamaged (no cracks, holes, etc.).
• Assemble the suction kit according to the drawing in »Layout and
components«.

5. Disposal

Please dispose of mamivac
regulations for plastic products.
suction kits may not be used:
suction kits in accordance with your local disposal
®
9