Setting Up And Connecting The Appliance - Dometic D15 Instrucciones De Uso

Setting up and connecting the appliance

8 Setting up and connecting the
appliance
8.1 Notes on setting up the appliance
When selecting the location, observe the following instructions:
 The ambient temperature should be in accordance with the climate class
mentioned for your country in the supplementary brochure. Otherwise, it
is possible that the inner temperature you set cannot be reached or
maintained. This could also be the case if there are extreme fluctuations
in the ambient temperature.
 The appliance should stand in the coldest part of the room, away from
heat sources (ovens, heating devices or radiators).
 The location must not be damp or wet.
 The appliance must not be exposed to direct sunlight. This can damage
the acrylic coating and lead to higher power consumption.
 The ground must be level and sufficiently stable to support the wine cellar
at full capacity.
 The appliance must be sufficiently ventilated. The ventilation slots on the
front of the appliance must not be obstructed.
 Note the information on the electrical connection, see "Notes on the
electrical connections" on page 35.
 Remove all the inner and outer packaging material before setting up.
 Make sure the appliance is level by adjusting the feet.
8.2 Notes on installing the appliance
D 15 and D 50 can be built-in or free-standing.
Width
Depth
Height
34
Installation size
D 15
300 mm / 11,8 "
590 mm / 23,2 "
870 mm / 34,3 "
D 15, D 50, D 100
D 50
600 mm / 23,6 "
590 mm / 23,2 "
870 mm / 34,3 "
EN