Assembly; Assembling The Appliance; Dismantling The Appliance - Cuisinart CH4DCE Instrucciones

3 ASSEMBLY

A. Assembling the appliance
1 Place the base of the mini food processor on a flat,
dry, stable surface
2 Place the work bowl on the central stem with the
handle turned to the left corner of the appliance
3 Turn the bowl in an anticlockwise direction locking it
onto the motor base
4 Holding the blade assembly by its sheath, carefully
place it over the central stem in the work bowl Push
the blade down A 'click' lets you know that it is
locked into place
5 To remove the blade, pull the assembly firmly
upwards
CAUTION! Always hold the blade assembly by its
sheath
Never touch the blade, it is extremely sharp
CAUTION! Never place the blade directly on the motor
shaft before the bowl is locked in place
CAUTION! Always insert the blade in the work bowl
before adding ingredients
13_CH4DCE_IB.indd 17
6 Add to the bowl the food that you
wish to process
7 Place the lid on the bowl The tab of
the lid should be positioned to the
right of the rear column Turn the
lid in an anticlockwise direction to
lock in place
N.B.: If the lid is not locked, the motor will not start
CAUTION! Make sure the motor has stopped
completely and the blade has stopped moving before
removing the lid
8 Plug the appliance in It is now ready to use
B. Dismantling the appliance
9 To remove the lid, hold the base of the appliance
with your left hand, grasp the lid and turn in a
clockwise direction
10 To remove the blade, pull the assembly firmly
upward
11 To remove the bowl, hold the base of the unit using
your left hand, grasp the handle of the bowl in your
right hand and turn in a clockwise direction while
lifting the bowl from the base
17
13/05/16 11:52