Wap-812 - Westinghouse Accu-Smart Multi-Stage WAP-811 Manual Del Usuario

All manuals and user guides at all-guides.com

WAP-812

1. Grasp the bottom edges of the front panel and pull forward.
2. Remove the filters out by grabbing the tabs on the filters and gently
pulling forward. The order of the filters (from front to back) is the pre-filter,
carbon, and HEPA. To replace the filters install the HEPA first, then
the carbon, and place the pre-filter to the front on the unit.
3. Press the lower part of the panel till an audible "click" is heard; which
indicates that installation is in place.
4. After replacing the HEPA filter, it will be necessary to reset the time of
operation hours of the HEPA filter by depressing and holding the
power button for 3 seconds. An audible beep will signal that the timer
has been reset and has recalculated the HEPA filter life.
13