auna KR-140 Manual De Instrucciones página 34

EN
34
• Short press the "MODE (8)" button can switch in-between from BT and
FM mode at any time as your desired.
BT device Pairing
• When switched to BT mode, the device will go for reconnect/pairing
mode automatically.
• Then, activate the BT function in your BT device (such as Mobile Phone
or Personal Computer); the device will enter to BT searching mode
automatically, if not, taps the related selection to manually enter to
searching mode. (refer to your device's manual when necessary)
• Your mobile device should show "KR-140" in BT list, and then select it
for pairing. Waiting for some seconds and will see connected message
as shown on your mobile device. (For some BT devices. You may need
to input "0000" as pairing password)
• If pairing is successful, a beep will sound, the "BT" icon light change to
solid from blinking.
• Now, you can start to music play from the mobile device by its music
player program.
Disconnect from paired device
• To disconnect with paired device and for better result;
• Long press the " /
tones will sound as identify.
• Or, you can choose "Disconnect" from BT paired device list on your
mobile device.
• In this case, the BT Kitchen Clock Speaker will turn back into "Searching
/ Pairing" mode in seconds, a series of tones will sound and the "BT"
icon will turn to blinking again from solid.
• Now, you can process for new mobile device pair or power Off the BT
Speaker if you wanted.
Erase preset pairing
• Every time you turn On the device and switch to BT mode. It will firstly
searching for the mobile device which has been paired previously and
still in record;
• The device will reconnect this mobile device as priority if it in BT
searching device mode and in connection range.
• If no device found in some seconds, the device will automatically turn
into pairing mode.
• Now you can process for new mobile device pair.
(12)" button to disconnect directly and a series of