Mitsubishi Electric E900T Manual Del Usuario página 101

Settings on the C24 module in the MELSEC PLC
system
AJ71(U)C24
Station number:
When communicating with the E900/E910: 0
Mode setting:
When communicating with the E900/E910: A
Setting of the switches:
Default
comm.
Switch settings in
software to
E900/E910
SW11 ON
SW12 ON
SW13 OFF
SW14 ON
SW15 ON
SW16 OFF
SW17 OFF
SW18 OFF
SW21 ON
SW22 ON
Setting items
Main channel RS-422
settings
Data length 8 bits
Transmission Refer to the table below
speed setting
Parity check Enabled
Parity setting Even
Stop bit 2 bits
Sum check Enabled
Write during Enabled
RUN
Position of Setting
Switch
ON OFF
RS-232C
7 bits
Disabled
Odd
1 bit
Disabled
Disabled
Notes
Valid for
modes A to D
–
–
–
Valid only
when SW16
is ON
–
For dedi-
cated protocol
B-1