Product Features; Noise/Vibration Information; Technical Data; Declaration Of Conformity - Bosch PCM 7 Manual Original

OBJ_DOKU-41582-001.fm Page 20 Thursday, July 24, 2014 2:44 PM
20 | English

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Handle
2 Laser warning label
3 Lever for releasing the tool arm
4 Blade guard
5 Retracting blade guard
6 Fence
7 Insert plate
8 Screws for insert plate
9 Handle for turning the saw table
10 Scale for mitre angle
11 Saw table
12 Mounting holes
13 Recessed handles
14 Material clamp
15 Scale for bevel angle
16 Roller
17 Saw blade
18 Dust bag
19 On/Off switch
20 Laser on/off switch (for marking of cutting line)
21 Chip ejector
22 Hex key (6 mm)
23 Bevel lock lever
24 Transport safety-lock
25 Clamping lever for any mitre angle
26 Hex socket screws (6 mm) of the fence
27 Mounting holes for material clamp
28 Spindle lock
29 Battery compartment
30 Hex socket screw (size 6 mm) for mounting of saw blade
31 Clamping flange
32 Interior clamping flange
33 Wing bolt
34 Threaded rod 35 Mitre angle indicator
36 Indicator for bevel angle
37 Laser beam outlet
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.

Noise/Vibration Information

Sound emission values determined according to
EN 61029-2-9.
Typically the A-weighted noise levels of the product are:
Sound pressure level 93 dB(A); Sound power level
106 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
1 609 92A 0VL | (24.7.14)
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 61029:
2 2
a =3.0 m/s , K=1.5 m/s .
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 61029 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.

Technical Data

Chop and Mitre Saw
Article number
Rated power input
No-load speed min
Laser type
Laser class
Weight according to
EPTA-Procedure 01/2003
Protection class
Permissible workpiece dimensions (maximal/minimal) see page 23.
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Dimension of suitable saw blades
Saw blade diameter
Blade body thickness
Mounting hole diameter

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards:
EN 61029-1, EN 61029-2-9, EN 60825-1.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, ETM9,
70764 Leinfelden-Echterdingen, GERMANY
PCM 7
3 603 M01 2..
W 1100
-1
4800
nm 650
mW < 1
2
kg 8.0
/II
mm 190
mm 1.4–2.5
mm 30
Bosch Power Tools