Product Description And Specifications; Intended Use - Bosch PCM 7 Manual Original

OBJ_DOKU-41582-001.fm Page 19 Thursday, July 24, 2014 2:44 PM
 Do not replace the installed laser with another laser
type. A laser that does not fit to this power tool could pose
dangers for other persons.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Never leave the machine before it has come to a com-
plete stop. Cutting tools that are still running can cause in-
juries.
 Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when
the cable is damaged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbol Meaning
 Wear a dust respirator.
 Wear safety goggles.
 Wear ear protectors. Exposure to noise
can cause hearing loss.
 Keep hands away from the cutting ar-
ea while the machine is running. Dan-
ger of injury when coming in contact with
the saw blade.
 Danger area! Keep hands, fingers or
arms away from this area.
Bosch Power Tools
Symbol Meaning
Laser Radiation
Do not stare into beam
Class 2 laser product
30 mm
Observe the dimensions of the saw blade.
The hole diameter must match the tool spin-
dle without play. Do not use reducers or
adapters.
The transport safety-lock 24 enables easier
handling of the machine when transporting
to various working locations.
– Transport safety-lock 24 pushed com-
pletely inward:
Securing the Machine
(Transport Position)
– Transport safety-lock 24 pulled com-
pletely outward:
Releasing the Machine
(Working Position)
Do not dispose of power tools into house-
hold waste!
Only for EC countries:
According to the European Guideline
2012/19/EU for Waste Electrical and Elec-
tronic Equipment and its implementation in-
to national right, power tools that are no
longer usable must be collected separately
and disposed of in an environmentally cor-
rect manner.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. In this, mitre
angles from –46° to +46° as well as bevel angles from 0° to
45° are possible.
The capacity of the power tool is designed for sawing hard-
wood and softwood.
The power tool is not suitable for cutting aluminium or other
non-ferrous metals or alloys.
English | 19
1 609 92A 0VL | (24.7.14)