Felisatti RS135/18L Manual De Instrucciones Original página 9

5. Switch lock-off
Switch Lock Button
█ SWITCH LOCK
1. To turn the saw ON, push the lock-off button to left side then depress trigger
Switch.
2. To turn it OFF, release the trigger switch and push the trigger switch and push
the lock-off button to right side to lock the trigger switch.
NOTE: The lock-off button can only be activated when the trigger is released.
█ VARIABLE SPEED
The variable speed trigger switch delivers higher speed with increased trigger
pressure and lower speed with decreased trigger pressure.
█ ELECTRIC BRAKE
To stop the reciprocating saw, release the trigger switch and allow the tool to
come to a complete stop. The electric brake quikly stops the saw from stroking.
This feature engages automatically when you release the trigger switch.
6. To secure and support the work piece
█ Use clamps or other equipment to secure and support the work piece.
Holding the work piece in your hand or against your body may laed to loss of
control. It is important to support the work properly to minimize body expo-sure,
blade binding, or loss of control.
7. Trial run
Before starting the work, wear protections (goggles, protective gloves) and run the tool in
the direction avoiding other persons to see if the tool is operated normally.
UNLOCKED
LOCKED
Tigger Switch
9