König Electronic SEC-TRANS20 Manual De Uso página 4

Idiomas disponibles

Connecting:

Camera

1. Connect the antenna and the DC power plug to the camera. Plug the AC plug into a wall

outlet. (only use the supplied AC/DC adapter)

2. The camera powers on automatically and the power LED (red) lights up

3. If the receiver is also powered on and the wireless connection is good, the link LED

(blue) lights up as well.

Receiver to TV

Connect the antenna and the DC power plug to the receiver.

Plug the AC plug into a wall outlet. (only use the supplied AC/DC adapter)

2. The receiver powers on automatically and the power LED (green) lights up. If the camera

is not powered on or there is no connection with the camera, the receiver signal LED

lights up green, indicating there is no signal

3. Connect the audio/video connection cable with the yellow (video) and the white (audio)

plug to the AV input of a TV or monitor.

Connect the 3.5mm plug to the AV out of the receiver.

AV Mode

Video

Note:

Do not connect the USB cable at the same time when the

audio/video connection cable already is connected to a TV

or monitor.

Audio

AV-Out