Intended Use; General Safety Instructions; Technical Data - Ritter Ritos P1H10D4-1 Manual De Instrucciones

GB
LED floodlight with stand/tripod
Installation and Operating Instructions
Dear Customer,
Thank you for purchasing our spotlight. Please read the following operating instructions carefully
before starting operation of the LED spotlight and keep them for future reference.

Intended use

The spotlight is waterjet-proof, IP44 and suitable for use in outdoor applications.
The spotlight is compliant with the relevant European CE directives.

General Safety Instructions

• never look directly into the LED light source. The light emitted can contain the colour blue.
• must always be placed at least 1m away from the surface being illuminated – in particular, the
power cable must not be illuminated or come into contact with the metal housing – maintain the
specified minimum clearances.
• always allow the device to cool down sufficiently – the casing may get extremely hot. To clean the
spotlight, disconnect it from the mains and secure the circuit against unintentional restart.
• must only be used on flat, stable surfaces.
• use only with a sufficiently protected 230V~ installation.
• must not be used in rooms that represent an explosion hazard (e.g. cabinetmaker's workshop,
painting operation, or similar).
• must not be used in the immediate vicinity of flammable materials.
• must not be set up in the immediate vicinity of pools, fountains, ponds, or similar bodies of water.
• must not be immersed in water or other liquids.
• must not be operated with wet hands; never look directly into the light source.
• must never be covered.
• must never be operated with an open housing, missing or damaged wiring compartment, or
missing or damaged lens.
• must never be sprayed or cleaned using a steam pressure cleaner since this can damage the
insulation and seals.
• must never be repaired by the user. Repairs must only be carried out by the manufacturer or an
authorized service representative.

Technical Data

• Type P1H10D4-1: 10W LED, 1000 Lumen
• Type P2H20D4: 20W LED, 2000 Lumen
• Type P1H10E1-1: 10W LED, 1000 Lumen
• Type P2H20E1: 20W LED, 2000 Lumen
• Type P3H30D4: 30W LED, 3000 Lumen
• Type P3H30E1: 30W LED, 3000 Lumen
• Type P2H20E2: 2x20W LED, 4000 Lumen
• Type P3H30E2: 2x30W LED, 6000 Lumen
• Voltage: 230V~, 50Hz
• Protection type: IP44
• Protection class: 2
4