Power Plug Assembly - Commercial Electric 847658001078 Guía De Uso Y Cuidado

Power Plug Assembly

1
Preparing the wire
WARNING: Disconnect the power before wiring.
WARNING: This is a polarized plug. One blade is wider
and marked WHITE. This blade must be connected to the
ribbed side of the wire.
□ Cut the end of the wire. One line is shorter by 0.2 in.
(5.0 mm) than the other. Ensure there are no strands
sticking out of the insulation.
□ Slide the cap off. With the plug in position as shown, place
the wire with the ribbed side at the bottom.
2
Attaching the wire to the plug
CAUTION: Do not use type TPT extra flexible cords
(as used on electric shavers) or type XT (as used on
Christmas tree lights), or any small diameter cords. To
avoid overheating, do not use on broilers, toasters, irons or
devices rated over 1000 watts (8 amps and 125 volts).
□ Bend the end of the wire and push into the bottom of the
groove.
□ Push the wire down with your thumb and slide the cap
completely into place.
.2 in.
Ribbed Side
8
7
Wider Blade